Flashforge Finder is a well assembled 3D printer which needs no setup. It comes with smart assisted leveling program. It features 3.5” Touch panel for easier and precise calibration. You can start printing with just few taps. You can control your printer wirelessly through Wi-Fi connectivity and it can detect filament when it runs out.
It also removes printing interruption with its in-built 4GB storage. It features Slide plate to remove 3D prints. It doesn’t have heated plate. Hence, it is very safer to use. It is also silent in use and it can easily operate with 50 dB of low noise level.
With Flashforge Finder, getting started with 3D printing is a lot easier than ever and it is very affordable. It can print just out of the box with little changes. It has got non-toxic PLA printing material and all heated parts are secured from touch. It is the best 3D printer for schools, families and beginners.
It is really very user-friendly 3D printer. It is completely assembled and it comes with assisted leveling program. Hence it needs just a couple of tweaks before you start prints. It comes with innovative and easy-to-use interface with a lot of presets for build quality. You can easily enter the exiting world of 3D printer.
Technology |
FFF (Fused Filament Fabrication) |
Material |
PLA / PVA |
Build Volume |
140 x 140 x 140 mm |
Layer Resolution |
100 to 500 micron |
XYZ accuracy |
11, 11, 2.5 micron |
Nozzle Diameter |
0.4 mm |
Nozzle Temperature |
– |
Build plate Temp. |
No Heated Build plate |
Extruders |
Single |
Filament Diameter |
1.75 mm |
Print Speed |
– |
Travel Speed |
– |
1 Printer |
Size |
420 x 420 x 420 mm |
Weight |
20 kg |
Colour |
RED |
1 Nozzle |
0.4 mm |
1 Filament |
600g of PLA |
Software |
FlashPrint software |
Application |
– |
Accessories |
Print Tap, SD card, USB cable, Power Cable |
Warranty |
12 month comprehensive warranty (excl. hot end) |
Lifetime Support |
Expert technical support via email, phone, or from our global community is available to you for the lifetime of your printer. |
Extended Support |
Online support pages, an easy to use app, extensive manuals, a detailed knowledgebase and so much more. You’re never far from the answers you need. |
Software |
FlashPrint software |
Supported OS |
Mac OS X, Windows |
File transfer |
SD card (included), Wi-Fi, USB Cable, and USB Stick. |
Supported file types |
STL, OBJ |
Operating ambient temperature |
– |
Input |
115-230 V,
50-60 Hz,
150 W |
Output |
– |